PRO-X NVR Hardware Reset (erase all settings)
- Please turn off the NVR and open the NVR cover.
- Please follow all standard electronic operation guideline, do not short any circle when operating.
- Locate the reset button on the motherboard (picture below)
- and press and hold the reset button. Turn on the NVR and wait until you hear a Long Beep (success).
- If you do not hear a long beep, only a short beep (regular bootup).
Please hold down the reset button & power off again. and repeat #4 until you hear the long beep again.
If you are still unable to complete the hardware reset process, please contact our support. (LINK)
We will try to help you. Thanks