Why Do I Need To Add Devices?
The NVMS7000 PC Client is not the recorder. It is a camera management software that allows you to manage multiple recorders and cameras within a single program. Before you can do any of that however, you must add it to the client itself.
Adding Devices to the Client
Step 1. Run the NVMS7000 PC Client
Step 2. Select "Device Management." If you do not see device management, you may need to select it under the Control Panel. Depending on your method of remote access set up, you may use one or the other below.
1) IP Adding Method
Step 1. Select "Add" as indicated below
Step 2. Fill in the device information under the IP/DOMAIN adding mode. If you do not know what to use, please refer to our remote access section.
Step 3. Select "Add" to finish adding your device to the client.
Step 4. Check if a group was made for your device by selecting "Group."
Step 5. Assuming that a group was not made, you may make one by selecting the 
add icon below. If you see your group, you may skip to step 10.
Step 6. Type in the desired group name and select "OK."
Step 7. Click on "Import" to open the import window.
Step 7. On the import window, select the cameras from your devices. This selection allows you to choose which cameras go into the group you made. Otherwise, you may simply use the "import all" function to import everything you have added to the client into your group.
Step 9. Close out of the import window and select "Main View"
Step 10. You should see the name of your group on the bottom left corner. You may now start live view.
2) PT Cloud Adding Method
This section assumes that PT Cloud has already been setup. If you have not done so yet, learn more here.
Step 1. Run the NVMS7000 PC Client
Step 2. Go to "Device Management." If you cannot find it, it can be found under the control panel.
Step 1. Select "Add New Device Type"
Step 2. Check the checkbox next to "PT Cloud Device" and click "OK."
Step 3. You should now be able to select "PT Cloud Device" in the device type list.
Step 4. Select the appropriate region you are in and then click on "Login" to log onto your PT Cloud/LTS Connect account.
Step 6. Type in the user login information. This is the account you created for PT Cloud. You may login when you have inputted the correct credentials.
Step 7. By default, your devices will be imported automatically into the client when you log in.
Step 8. The devices are grouped together. You may find the group under the groups tab as shown below.
To learn more about using NVMS7000 with PT Cloud, click here.
If you do not have any devices added to your account yet, learn more here on how to add them using the NVMS7000 PC Client.